The HD Bar from AODA.This sissy bar stands 24" tall and weighs in at 10 lbs. The two HD emblems are 7 1/2" tall and 6" in width and are cut from 3/8" thick solid steel with a calypso waterjet system,very rare emblems to acquire.The bar frame is made of 3/4" hexagonal bar hand twisted AODA style.The spiked center bar is 3/4" hexagonal bar.The spikes are 2 1/2" tall solid billet aluminum.8 3/4" at the base this sissy bar fits 2004 and newer Sportsters,2006 and newer Dyna models,1984-2005 softails and some other models or any custom application.It is unpainted at this point.Feel free to call or email with any questions.
The Knuckle Bar.This bar stands around 22" tall.And is made from 1/2" hexagonal bar. The center brace bar is also 1/2" hex bar that was hand twisted. 8 3/4" at the base this sissybar fits 2004 and newer Sportsters,2006 and newer Dyna models,1984-2005 softails and some other models or any custom application.The Knuckles are interchangable.
Sporty Bar.This sissy bar stands 15" tall and is 6 3/4" at the base i measured this bar for a 2005 1200 sportster with quick detach mounts.Made from 1/2" thick solid round bar with a 2 1/2" solid billet aluminum spike at the center.The green skull on top comes wth the Sporty bar but is simply a shifter knob that can be replaced at will with any shifter knob you desire.The bar itself is unpainted at this time.Feel free to call or email me with any questions you have.
The Crusader. My representation of the first Crusade in the year 1095 (milites Christi) also known as fideles Sancti Petri.
The Crusader stands around 23" tall when on the bike. 8 3/4" at the base. This sissy bar fits 2004 and newer Sportsters, 2006 and newer Dyna models, 1984-2005 softails and some other models or any custom application. The frame of the crusader is solid 3/4" hexagonal bar that has been hand twisted. The support arch is 1/2" solid hexagonal bar that is also hand twisted. The center bar in which the crusader is mounted is 3/4" hexagonal bar hand twisted. The spike is made of solid T6 billet aluminum. The large crosses are made of 1/4" thick solid steel and the smaller ones are 3/16" thick solid steel. The Crusader himself is made of cast iron that has been mounted to the frame with a stainless steel mount. The jaw of the Crusader is also adjustable. The entire sissy bar was heliarc welded for ultimate strength. If you have any questions feel free to call or email.
$725.00 (UNPAINTED) (SOLD)
The Berserker AKA the Battleaxe sissy bar is another one of a kind creation from AODA, this sissybar stands 28" tall and is 10" wide at the blades. Made from 3/4" hexagonal bar hand twisted AODA style :).It has been powder coated with a high gloss black. Really so much custom work to this sissy bar its hard to list, if you have any questions feel free to email me or call. The Berserker was created to fit a 2009 Harley Streetglide, but will also fit many other models..and of course any custom applications. More pictures available.
$725.00 (UNPAINTED) (SOLD)
My life long fascination with the undead shines through again with the newest creation from AODA. I give you Van Helsing's Cross. This one of a kind sissy bar was created using a combination of steel,cast iron,1/2" solid round bar and 1/2" solid hexagonal bar that was hand twisted. All tig welded for strength. Van Helsing's Cross sissybar stands 2ft overall and is a solid piece of Art form and function.8 3/4 inches wide at the base and should fit 2004 and newer Sportsters,2006 and newer Dyna models,1984-2005 softails and some other models or a custom application. UPDATE- Van Helsing's Cross has been powder coated with a badass color called Silver Vein metallic.It has a nice,rich semi-gloss textured finish.I added three new pictures that does it no justice, you have to see it to believe it.
$450.00 (UNPAINTED) (SOLD)
The new Cross Bar sissy bar. Standing 28" tall overall and made from 1/2" hexagonal solid bar that has been hand twisted and tig welded 10 degrees back for a sleek look to 1/2" X 2 3/4" square bar at the base for mounting. The center bar is 1/2" solid round bar with a 2 1/2" solid billet aluminum spike facing down. It has two 3/16 " solid crosses on top back to back that measure 7 3/4" tall X 6" wide that are cut Gothic style. It's unpainted in these pictures and mounting holes are not drilled. I don't drill the holes beacause of so many different applications. It's 8 3/4" wide at the base and will fit 2004 and newer sportsters, 2006 and newer Dyna models,1984-2005 softails and some other models. It will fit any custom applications. I know how hard it is to find motorcycle accessories that EVERYONE else doesn't have or is capable of getting, well here it is. Contact me with ANY questions you may have. I also have many more pictures if your interested.
$500.00 (UNPAINTED) (SOLD)
The Dagger Sissy bar. As always here at AODA it is one of a kind. Made of 1/2" hexagonal solid bar that was hand twisted. I used links of chain to pull it all together. The dagger's handle is made of cold cast resin that is VERY durable and weather resistant, it was removed from the blade and all glue removed from inside the handle and replaced with an industrial epoxy with over 4,000 tensile strength guaranteeing it will never come off while riding. The daggers blade is made of 440 stainless steel and was tig welded to the sissy bar. The spikes are 2 1/2" long and made of billet aluminum. Email me with any questions you may have. This one of a kind piece of art form and function wont last long, so grab it now. Fits most HD dyna models 2005-2012 and ANY custom applications. Has been clearcoated in its raw metal form.
$650.00 (UNPAINTED) (SOLD)
This is the new Pitchfork Sissy bar. Once again, Ancient Of Days Art brings you a one of a kind creation. This Sissy bar will look badass on any ride you put it on. Hell... its looking so good I say hang it on the wall :) . The round bar on which the pitchfork is mounted is hand forged and hammered. The pitchforks handle is an antique style cast iron sleeve. The pitchfork itself is made of 1/2" hexagonal solid bar that has been hand twisted using old forging techniques.All of my sissy bars are TIG (HELIARC) welded for strength. The spikes are 2 1/2" long and made of solid billet aluminum. Laying on both sides of the pitchfork at the center are two medieval Gothic crosses each one 3/16 of an inch thick. It's 8 3/4" at the base and will fit 2004 and newer sportsters. 2006 and newer dyna models. 1984-2005 softails and some other models and any custom applications you may have in mind. Feel free to message me with any questions.I have alot more photos of all my sissy bars,just ask and ill send you more. ONE OF A KIND. Made in America.
$500.00 (UNPAINTED) (SOLD)